Answer
Dec 02, 2024 - 06:26 AM
This unit is designed to fit anywhere a Contura switch would mount so it is normally mounted in lieu of a switch in a Contura panel. Mounting it in a blank panel would require you to cut a very precise hole that would be difficult to achieve. Because of this nobody tries to mount it by itself with no additional support, which is why no drawing is provided. If you want to mount it in a stand alone configuration I would recommend the Blue Sea 8268 Contura Single Mounting Bracket Then when you go to mount the bracket you will have a bit of wiggle room with the cutout in case your cuts are not precise enough, because the bracket has flanges. Here is the cutout drawing for the bracket (which is of course bigger than the cutout for the switch) and further down is a drawing showing the outer dimensions of the mount. As well as having a single mount we also have three and six gang mounts if you want to add other items, and there are modular mounts so you can make up a gang of two or four or any amount you want.
