About This Q&A
Ask a question and receive knowledgeable answers from topic experts
Does the blue sea 8077 device offer both switching and circuit protection?
Asked 1 ´year ago | Blue Sea 8077 AC Panel Main 120VAC 30A
Answer:
Yes, the blue sea 8077 integrates both switching and circuit protection within a single device.
What are the dimensions of panel 8058?
Asked 11 ´months ago | Blue Sea 8058 Circuit Breaker Panel 120VAC - three breakers
Answer:
The dimensions of the blue sea breakers panel 8058 are 5.25 inches in width and 3.75 inches in height.
Can the input/output current be configured on the Orion XS?
Asked 1 ´year ago | Victron ORI121217040 Orion XS 12/12-50 non-isolated DC-DC charger
Answer:
Indeed, the Orion XS 12/12-50A allows for the configuration of the input/output current up to 50A.
Does this 100 amp marine alternator have an isolated groun?
Asked 1 ´year ago | Balmar 621-100-SV Alternator -12 Volt 100 Amp Single Pulley
Answer:
The all the 6 series alternators come with an isolated ground as standard.
Does this shunt pcb also work with the BMV 700?
Asked 11 ´months ago | Victron SPR00053 PCB for Shunt of BMV 712 / 702
Answer:
Indeed, the pcb shunt is compatible and can be utilized with the BMV 700.
What's the warranty length for this 200 amp battery isolator I'm buying?
Asked 1 ´year ago | Victron ARG200201020 Argofet 200 Amp Battery Isolator for two batteries
Answer:
The 200 amp battery isolator you're purchasing comes with a manufacturer's warranty that lasts for five years.
Is the Asus USB-N14 compatible with the Cerbo GX?
Asked 1 ´year ago | Victron Energy BPP900200300 CCGX Long Range WiFi Module (ASUS USB-N14)
Answer:
Yes you can use the Asus USB-N14 to increase the WiFi range of the Cerbo GX
Asked 1 ´year ago | Balmar 48-YSP-4JH-E Pulley Kit for Yanmar 4JH2-E -TE -HTE -DTE -UTE
Answer:
Yes the Balmar 48-YSP-4JH-E Pulley Kit is the right kit for the Yanmar 4JH2-E
Can we use 10 or 8 gauge wire for the Victron 75-15 MPPT solar charge controller?
Asked 1 ´year ago | Victron Energy SCC075015060 Smart Solar MPPT 75/15 Charge Controller with Bluetooth
Answer:
The MPPT 75/15 will accept a maximum of 10 awg wire
Can the Victron 100 amp diode isolator be used for my two alternator system?
Asked 1 ´year ago | Victron ARG100301020 Argofet 100 Amp Diode Battery Isolator for three batteries
Answer:
If you have two alternators then you need two isolators. They can both output to the same three batteries.
Asked 1 ´year ago | Victron Energy PMP122200102 MultiPlus 12/2000/80-50 120V VE.Bus (UL Listed)
Answer:
Yes it does. Its a pretty small output though, clocking it at just 1 amp.
How long is the Victron NMEA 2000 VE.Can to Micro-C male cable?
Asked 1 ´year ago | Victron Energy ASS030520200 VE.Can to NMEA2000 Cable
Answer:
The Victron Energy ASS030520200 VE.Can to NMEA2000 Micro-C male cable measures approximately 1 meter in length.
Can this temperature sensor, work with Cerbo GX?
Asked 1 ´year ago | Victron Energy ASS000001000 temp sensor for Quattro, MultiPlus and Cerbo GX
Answer:
Yes the Victron Energy ASS000001000 temp sensor is compatible with the Cerbo GX.
Does the MultiPlus/Quattro Inverter Charger include a temperature sensor?
Asked 1 ´year ago | Victron Energy ASS000001000 temp sensor for Quattro, MultiPlus and Cerbo GX
Answer:
Yes, each MultiPlus or Quattro Inverter Charger comes with a temperature sensor.
Does the Blue Sea 5032 fuse block offer storage for spare fuses?
Asked 1 ´year ago | Blue Sea 5032 Split Bus Fuse Block for 2 sets of 6 Fuses
Answer:
Yes, the blue sea 5032 cover does provide storage for two spare fuses.
Can I return the shunt pcb if needed?
Asked 11 ´months ago | Victron SPR00053 PCB for Shunt of BMV 712 / 702
Answer:
Sorry, the pcb shunt you are asking about cannot be returned.
Does the Victron battery monitor support second bank voltage reading?
Asked 1 ´year ago | Victron Energy BAM030712000 BMV 712 Smart Battery Monitor with Bluetooth
Answer:
Yes, the Victron Energy BMV 712 can measure the voltage (only) of a second battery bank.
How is the 150 amp thermal circuit breaker mounted?
Asked 11 ´months ago | Blue Sea 7189 Surface Mount 285-Series Circuit Breaker 150 Amps
Answer:
The 150a circuit breaker is mounted using a surface mount and the connections are located at the front.
What's the rating of the 12v usb outlet in the SeaLink charger?
Asked 1 ´year ago | Marinco SeaLink Deluxe Dual USB Charger and 12V Receptacle
Answer:
The 12 volt receptacle that comes with the SeaLink USB charger has a rating of 20 amps.
What is the warranty for this battery isolator?
Asked 1 ´year ago | Victron ARG200301020 Argofet 200 Amp Diode Battery Isolator for three batteries
Answer:
The Victron ARG200301020 Argofet 200 Amp Diode Battery Isolator for three batteries comes with a five-year manufacturer's limited warranty.
Asked 3 ´months ago | Victron Energy Orion 12/24-5 Step-Up Isolated DC/DC Converter (120W)
Answer:
Yes you are correct, turning off the remote switch ensures there is no output from the DC DC Converter.
I need the packaged weight and dimensions of this kit to forward onto Panama. Thanks
Asked 1 ´year ago | Balmar 60-YP-24-70-K6 Alternator and regulator kit -24 Volt 70 Amp K6 Pulley
Answer:
The box is 14 x 12 x 12 inches and lists as 20 Lbs
What is the voltage limit for this fuse
Asked 1 ´year ago | Blue Sea 5240 ATO/ATC Fuse 7.5 Amp (2 pack)
Answer:
Blue Sea ATO/ATC Fuses have a maximum voltage limit of 32 Volts DC.
Is the Lynx Smart BMS compatible with my type of batteries?
Asked 1 ´year ago | Victron Energy LYN034170210 Lynx Smart BMS 1000 (M10)
Answer:
The Lynx Smart BMS is only intended to be used with Victron Smart Lithium Batteries.
Which batteries can the Lynx Smart BMS work with?
Asked 1 ´year ago | Victron Energy LYN034170210 Lynx Smart BMS 1000 (M10)
Answer:
The Lynx Smart BMS is specifically designed to work exclusively with Victron Smart Lithium Batteries.
Can I purchase only the alternator from the Balmar XT-DF-170-K6-KIT?
Asked 9 ´months ago | Balmar XT-DF-170-K6-KIT alternator kit with Max Charge regulator
Answer:
Yes you can. Then it is sold as the Balmar XT-DF-170-K6 dual foot alternator with K6 pulley
What's the shrink ratio of the 3 to 1 heatshrink tubing?
Asked 1 ´year ago | 3 to 1 Adhesive Lined Heatshrink Tubing 1/4
Answer:
The heatshrink tubing of the 3 to 1 Adhesive Lined Heatshrink Tubing 1/4" boasts a shrink ratio of 3:1.
What cable do I need to to connect the Mk3 USB interface to a MultiPlus?
Asked 1 ´year ago | Victron Energy ASS030140000 MK3-USB Interface (VE.Bus to standard USB)
Answer:
This requires a VE Bus cable.
Cn the 3600 Isolation transformer take an input of 240V 50Hz and output 115V 60Hz ?
Asked 1 ´year ago | Victron Energy ITR050362041 Isolation Transformer 3600W with autodetect input voltage
Answer:
This transformer can change the voltage but not the frequency.
Can you tell me the part number or length for a spare serpentine belt for the 48-YSP-3JH-E?
Asked 1 ´year ago | Spare Serpentine Belt
Answer:
The 48-YSP-3JH-E kit used a 46" belt which should be marked J460
Do you have a serpentine kit for a Universal M35B. It's on a Catalina 34 MKII.
Asked 1 ´year ago | Balmar 48-USP-M25 Pulley Kit for Universal M25, M-A
Answer:
The kit for the Universal 35B is the Balmar 48-USP-M35B Pulley Kit for Universal M35B, M25XPB, M40B
Which adjustment arm is right for a Yanmar 4JH4 engine?
Asked 1 ´year ago | Balmar 48-YSP-4JH-B Pulley Kit for Yanmar 4JH4, -TE, HTE, -DTE
Answer:
For the Yanmar 4JH4 engine, the UBB2 is the appropriate adjustment arm.
Is this priced with the wiring harness?
Asked 1 ´year ago | Balmar MC-618-H Voltage Regulator with harness 12 Volts
Answer:
The "H" in the part number MC-618-H denotes that the wire harness is included,
What is the function of the AC Selector Switch?
Asked 1 ´year ago | Blue Sea 9009 AC Selector Switch, 120V 32A OFF +2
Answer:
The AC Selector Switch is used for connecting one of two 120V AC sources to a single load.
Asked 1 ´year ago | Victron Energy Orion 24/12-40 DC-DC Converter with 40 Amp Output p/n ORI241240021
Answer:
The converter uses push on connectors and they do not support 40 amps so they doubled them up.
Does the Balmar MC-618 come with a Lithium profile?
Asked 1 ´year ago | Balmar MC-618-H Voltage Regulator with harness 12 Volts
Answer:
Yes, the Balmar MC-618 does feature a built-in Lithium profile.
How much does this 48/10000 Victron Quattro inverter charger weigh?
Asked 1 ´year ago | Victron QUA483100100 Quattro 48/10000/140-100/100 120V VE.Bus
Answer:
The Victron Quattro 48/10000/140-100/100 120V VE.Bus weighs 128 Lbs.
What is the transfer capacity of the Quattro 48/10000/140-100/100 120V VE.Bus
Asked 1 ´year ago | Victron QUA483100100 Quattro 48/10000/140-100/100 120V VE.Bus
Answer:
The Quattro 48/10000/140-100/100 120V VE.Bus has a transfer capacity of 100 amps on both its inputs.
Is the Phoenix smart charger ignition protected?
Asked 1 ´year ago | Phoenix Smart IP43 Charger 12/30(3)
Answer:
No sorry, none of the Victron chargers are ignition protected.
How long is the temperature sensor ASS000001000 included with a multiplus
Asked 1 ´year ago | Victron Energy ASS000001000 temp sensor for Quattro, MultiPlus and Cerbo GX
Answer:
The cable is about 4 ft long
What gauge wire does the device have?
Asked 1 ´year ago | Victron Energy SBS050150200 Long Range Bluetooth Smart Battery Sense
Answer:
It appears to use 18 awg or similar
What's the voltage of this Victron Quattro model?
Asked 1 ´year ago | Victron QUA483100100 Quattro 48/10000/140-100/100 120V VE.Bus
Answer:
The Victron Quattro 48/10000/140-100/100 120V VE.Bus is for 48 volts DC, 120 volts AC
Asked 1 ´year ago | Balmar MC-TS-A Alternator Temperature Sensor
Answer:
We tried this and it worked. You might need to do a bit of calibration for maximum accuracy.
Is the connection on this a 3/8 th
Asked 1 ´year ago | Balmar MC-TS-A Alternator Temperature Sensor
Answer:
The battery temp sensor has a 3/8" connector but the alternator sensor is smaller, Its terminal is 1/4"
Can this be used to turn off a 24v battery system for my trolling motor?
Asked 1 ´year ago | Blue Sea 6006 Mini ON-OFF Battery Switch
Answer:
Yes this switch can be used for up to 48 volts DC
Can this Skylla be controlled by a Lithium battery BMS
Asked 1 ´year ago | Victron Energy SDTG2401003 Skylla-TG 24/100(1+1) GL 120-240V Battery Charger
Answer:
This charger is not suitable for charging lithium batteries and has no lithium program.
Hello, How long is the wire for this product? Thanks
Asked 1 ´year ago | Victron Energy ASS000100000 Temperature Sensor for BMV 702/712 and Smart Shunt
Answer:
This wire is approx 4 ft long.
Asked 1 ´year ago | Victron Energy SHU050150050 SmartShunt 500A/50mV (Standard version)
Answer:
Yes it does.
Whats the difference between isolated and non isolated, and why would I choose one over the other?
Asked 1 ´year ago | Victron Energy ORI121222120 Orion-Tr Smart 12/12-18A Isolated DC-DC charger
Answer:
This question is addressed in my article Isolated vs Non-Isolated DC DC Charger?
Can this cable be used to interface with the victron Cerbo unit?
Asked 1 ´year ago | Victron ASS030530010 VE. Direct to Standard USB interface cable
Answer:
It is used to connect a VE Direct device (such as an MPPT) to the Cerbo.
