Answer
Apr 23, 2026 - 12:09 PM
You will need the WSVECROSS Crossover Cable. This is a specific Cat 6 crossover cable where one end plugs into the VE Can Port of the Victron device and the other plugs into the Wakespeed regulator. Then you need a Victron end terminator at the Victron end of the network and a Wakespeed end terminator at the Wakespeed end. The two are not interchangeable. Victron provides end terminators for their equipment but with Wakespeed you have to purchase them separately. It is the Wakespeed RJ45 single data end terminator. If the standard 4 ft. long WSVECROSS Crossover Cable is too short there are instructions on the Wakespeed site on how to make your own by adapting a standard cable.
