Staff Answer
May 05, 2026 - 10:51 AM
This is the most essential accessory for any Victron MultiPlus or Quattro owner. It connects your inverter/charger to your laptop. Using the free VictronConnect or VEConfigure software, you can perform critical tasks like:
Updating firmware and programming are covered in our two blog posts, each with their own video. Do the firmware one first.
- Changing the battery type to Lithium (LiFePO4).
- Setting the "PowerLimit" for weak shore power pedestals.
- Updating firmware.
- Setting low voltage shutdown voltages
- Setting up alarms
- Disabling the UPS (uninterruptable power supply) setting to use the inverter charger with small generators
- Setting up parallel, split phase or three phase operation.
- Programming "Assistants" for complex tasks like generator auto-start.
- Troubleshooting problems
Updating firmware and programming are covered in our two blog posts, each with their own video. Do the firmware one first.
