Accessories Q&A

Question 1

Are these Balmar Spacers anodized steel? View answer

Asked 13 ´days ago | Accessories > Balmar 10-4048 Spacer 1/4

Question 2

Is the Balmar CFII-12/24 Centerfielder II Charge Parallel Controller being discontinued? View answer

Asked 2 ´months ago | Accessories > Balmar CFII-12/24 Centerfielder II Charge Parallel Controller (while stocks last)

Question 3

Is the installation of the 7060 Rebuild Kit a DIY job, or does it require a professional? View answer

Asked 2 ´months ago | Accessories > Balmar 7060 Rebuild Kit for 6 Series 12 Volt Alternators

Question 4

What is the Balmar 7060 Rebuild Kit, and which alternators is it for? View answer

Asked 2 ´months ago | Accessories > Balmar 7060 Rebuild Kit for 6 Series 12 Volt Alternators

Question 5

Balmar's site states the spacer is 1" diameter (I assume OD). Can you verify the inside diameter? View answers

Asked 3 ´months ago | Accessories > Balmar 10-4048 Spacer 1/4

Question 6

What are the limitations or warnings for using the APM-12? View answer

Asked 3 ´months ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 7

How do you install the Balmar APM-12? View answer

Asked 3 ´months ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 8

What are the key features of the APM-12? View answer

Asked 3 ´months ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 9

What is the Balmar APM-12 and what is its primary purpose? View answer

Asked 3 ´months ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 10

Is there a complete repair kit available for this product? View answer

Asked 3 ´months ago | Accessories > Balmar PAS-0111 internal regulator for Balmar 6 series 12 volt alternators

Question 11

What is the cable length of the Balmar MC-TS-B30 battery temp sensor? View answer

Asked 3 ´months ago | Accessories > Balmar MC-TS-B30 Battery Temperature Sensor with extra length cable

Question 12

What is the cable length of the Balmar MC-TS-A80 alternator temp sensor? View answer

Asked 3 ´months ago | Accessories > Balmar MC-TS-A80 Alternator Temperature Sensor with extended cable

Question 13

Is an adjustment arm included with this Balmar BBU tensioning device? View answer

Asked 4 ´months ago | Accessories > Balmar BBU Universal Belt Buddy Tensioner (without adjustment arm)

Question 14

What function does the Balmar Kit-0070 Bushing Set serve? View answer

Asked 4 ´months ago | Accessories > Balmar Kit-0070 Bushing Set for 60 Series alternators

Question 15

In what ways does the APM-48 safeguard the alternator? View answer

Asked 5 ´months ago | Accessories > Balmar APM-48 Alternator Protection Module for 48V systems

Question 16

Are there other sizes available for this spacer? View answer

Asked 5 ´months ago | Accessories > Balmar 10-4047 Spacer 1

Question 17

Are there other sizes available for this spacer? View answer

Asked 5 ´months ago | Accessories > Balmar 10-4047 Spacer 1

Question 18

What is the dogleg size in the Balmar UBB2 adjustment arm? View answer

Asked 5 ´months ago | Accessories > Balmar UBB2 Dogleg adjustment arm with Belt Buddy Tensioner

Question 19

TIENE EL REGULADOR INCORPORADO O HAY QUE COLOCARLE UNO EXTERNO View answer

Asked 6 ´months ago | Accessories > Balmar 70-XT-170 Rebuild Kit for 170 amp XT Series Alternators

Question 20

Could you provide the dimensions of the Balmar 10-4000 1/2" spacer? View answer

Asked 6 ´months ago | Accessories > Balmar 10-4000 Spacer 1/2

Question 21

What function does the Balmar 10-4048 Spacer 1/4" serve? View answer

Asked 6 ´months ago | Accessories > Balmar 10-4048 Spacer 1/4

Question 22

Does the Digital Duo Charge benefit my start batt over a Battery to Battery charger? View answer

Asked 10 ´months ago | Accessories > Balmar DDC-12/24 Digital Duo Charge

Question 23

Can the universal belt tensioner slot fit a 1/2" bolt? View answer

Asked 1 ´year ago | Accessories > Balmar UBB Universal Adjustment Arm with Belt Buddy Tensioner

Question 24

What happens if an alternator output is disconnected while the engine is running? View answer

Asked 1 ´year ago | Accessories > Balmar APM-24 Alternator Protection Module for 24V systems

Question 25

How does the Centerfielder II manage two alternators? View answer

Asked 1 ´year ago | Accessories > Balmar CFII-12/24 Centerfielder II Charge Parallel Controller (while stocks last)

Question 26

Which batteries are compatible with the Balmar DDC-12/24 charger? View answer

Asked 1 ´year ago | Accessories > Balmar DDC-12/24 Digital Duo Charge

Question 27

Question about Yanmar 3JH5E pulley, idler wheel, and yanmar belt tensioner View answer

Asked 1 ´year ago | Accessories > Balmar 48-YP-IDL Idler pulley for Yanmar JH engines

Question 28

How does the Balmar APM-12 protect alternators? View answer

Asked 1 ´year ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 29

Does the Balmar APM-12 need replacement after absorbing a voltage spike? View answer

Asked 1 ´year ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 30

How to connect Balmar ULR with Penta warning charging lamp View answer

Asked 1 ´year ago | Accessories > Balmar ULR Universal Lamp Relay

Question 31

What kind of terminals does the Balmar APM-12 use? View answer

Asked 1 ´year ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 32

What system voltage is the Balmar APM-12 designed for? View answer

Asked 1 ´year ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 33

Can I use the Balmar Duo Charge to charge a Lithium Battery? View answer

Asked 1 ´year ago | Accessories > Balmar DDC-12/24 Digital Duo Charge

Question 34

Are there instructions available for Balmar 7095 alternator rebuild kit? View answer

Asked 1 ´year ago | Accessories > Balmar 7095 Rebuild Kit for 95 Series Alternators IS NO LONGER AVAILABLE, SORRY

Question 35

Does the Balmar 1010 wire harness work with older Balmar regulators? View answer

Asked 1 ´year ago | Accessories > Balmar 1010 Wire harness for ARS5 or MC618 regulator to 6 series or XT alternators

Question 36

What is the function of the tensioner? View answer

Asked 1 ´year ago | Accessories > Balmar UBB Universal Adjustment Arm with Belt Buddy Tensioner

Question 37

Does the Balmar Belt Buddy serve as a tensioning device on this alternator adjustment arm? View answer

Asked 1 ´year ago | Accessories > Balmar UBB Universal Adjustment Arm with Belt Buddy Tensioner

Question 38

Does a different version of the Balmar Belt Buddy exist? View answer

Asked 1 ´year ago | Accessories > Balmar UBB Universal Adjustment Arm with Belt Buddy Tensioner

Question 39

With what devices can the alternator temperature sensor be used? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Question 40

What is the purpose of the alternator temperature sensor? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Question 41

How is the alternator temperature sensor designed to be installed? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Question 42

What is the length of the wire provided with the alternator temperature sensor? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Question 43

Is the alternator temperature sensor recommended for any specific system? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Question 44

What is the hookup configuration for the alternator temperature sensor? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Question 45

Where does the alternator temperature sensor bolt on? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Question 46

Is the connection on this a 3/8 th View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Question 47

will this Balmar alternator temperature sensor work connected to a Victron Cerbo GX? If so, can one sensor feed both the Balmar regulator and Cerbo GX in parallel? It would be great to be able to monitor and log the alternator temperature in the Curb GX if this is compatible? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Question 48

Is the MC-TS-A available in longer lengths? I need two of these that are 22' long. View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Question 49

Does the Balmar alternator sensor function with a Xantrex XAR regulator? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Question 50

Is this alternator sensor compatible with the Balmar MC 614? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Accessories Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools