Asked 8 ´months ago | BEP 779-LB-2 LINKBAR 42.5mm
Answer:
The round holes are 11mm diameter, the elongated holes are 11 x 15mmIs the Alternator in your Balmar XT-DF-250-J10-KIT 24V or 12V?
Asked 8 ´months ago | Balmar XT-DF-250-J10-KIT Alternator Kit with Max Charge regulator
Answer:
The XT-DF-250-J10 alternator has a 12 volt output.
What external antenna do you recommend for the Victron Energy ASS030543020 GlobalLink 520?
Asked 8 ´months ago | Victron Energy ASS030543020 GlobalLink 520
Answer:
The recommended antenna for the Victron Energy ASS030543020 GlobalLink 520 is the Victron Energy ANT100200100 Outdoor LTE-M wall-mount antenna
Can I buy just the cover for the 5026? My cover is broken.
Asked 8 ´months ago | Blue Sea 5026 ST Blade Fuse Block with 12 Circuits
Answer:
You need to contact Blue Sea Systems directly for spare parts like this.
What size wire gauge should be used to connect the switch to the inverter?
Asked 8 ´months ago | Victron Phoenix Inverter Control for VE Direct Inverters
Answer:
16 or 18 awg would be good for this
Asked 8 ´months ago | Victron BAT512120610 Smart Lithium Iron Phosphate Battery 12.8V 200 Ahr
Answer:
Victron offer a very safe system for their batteries but they do not have UL certification.
I have a 60-100 SV alternator. What rebuild kit do I need?
Asked 8 ´months ago | Balmar 7060 Rebuild Kit for 6 Series 12 Volt Alternators
Answer:
For the 60-100-SV you need the Balmar 7060 Rebuild Kit for 6 Series 12 Volt Alternators
Can this be used to charge a 24 v lithium battery in an RV with a 12 v smart alternator?
Asked 8 ´months ago | Victron Energy ORI122420020 Orion 12/24-20 Step-Up DC/DC Voltage Converter
Answer:
No this is a DC DC Converter, not a charger. You need a Smart DC DC Charger
Do you sell just the adjustment arm? Not including the tensioner?
Asked 9 ´months ago | Balmar UBB2 Dogleg adjustment arm with Belt Buddy Tensioner
Answer:
Yes the Balmar UAA2 adjustment arm is the same thing without the tensioner
Will this Balmar UBB2 work with my 2003 Yanmar 6LY2A-STP
Asked 9 ´months ago | Balmar UBB2 Dogleg adjustment arm with Belt Buddy Tensioner
Answer:
Yes the Balmar UBB2 works for the Yanmar 6LY2A-STP
Is this adjustment arm available without the tensioning device?
Asked 9 ´months ago | Balmar UBB2 Dogleg adjustment arm with Belt Buddy Tensioner
Answer:
Yes the Balmar UAA2 adjustment arm with dogleg is the same thing without the tensioner
Is the Balmar 48-YSP-4JH-D pulley kit the correct one to use for the Yanmar 4JH3-TE engine?
Asked 9 ´months ago | Balmar 48-YSP-4JH-D Pulley Kit for Yanmar 4JH3, E, TE, HTE
Answer:
Yes the Balmar 48-YSP-4JH-D Pulley Kit is for the following engines:- Yanmar 4JH3
- Yanmar 4JH3-E
- Yanmar 4JH3-TE
- Yanmar 4JH3-HTE
What's the Balmar 48-YSP-4JH-F pulley kit crankshaft diameter for RPM calculations?
Asked 9 ´months ago | Balmar 48-YSP-4JH-F Pulley Kit for Yanmar 4JH, -E -TE -HTE -DTE
Answer:
The Balmar 48-YSP-4JH-F pulley kit crank pulley is the 48-AM-110 which has an effective diameter of 5.803"
How long are the provided power cables that go to positive terminals?
Asked 9 ´months ago | Victron Energy BAM030712000 BMV 712 Smart Battery Monitor with Bluetooth
Answer:
They are approx 3-4 ft long
Asked 9 ´months ago | Victron Energy BAM030712000 BMV 712 Smart Battery Monitor with Bluetooth
Answer:
Here is the dimensional drawing for the entire range of BMV meters
Can this Skylla be controlled by a Lithium battery BMS
Asked 8 ´months ago | Victron Energy SDTG2401003 Skylla-TG 24/100(1+1) GL 120-240V Battery Charger
Answer:
This charger is not suitable for charging lithium batteries and has no lithium program.
Asked 8 ´months ago | Marinco SeaLink Deluxe Dual USB Charger and 12V Receptacle
Answer:
If you do this as two separate holes they would each want to be 1 1/8" diameter.
Does this include the wires to connect?
Asked 8 ´months ago | Marinco SeaLink Deluxe Dual USB Charger and 12V Receptacle
Answer:
No you will have to provide your own wires for this.
Asked 8 ´months ago | Blue Sea 6011 Mini Dual Circuit Plus Battery Switch
Does this switch also shut off the neutral wire for the generator?
Asked 8 ´months ago | Blue Sea 9009 AC Selector Switch, 120V 32A OFF +2
Answer:
Yes, its a two pole switch and switches both hot and neutral conductors.
Can I use switch #9009 for two separate loads?
Asked 8 ´months ago | Blue Sea 9009 AC Selector Switch, 120V 32A OFF +2
Answer:
This switch just has a single output, there are not two independent outputs
Does the AC Selector Switch provide circuit protection?
Asked 8 ´months ago | Blue Sea 9009 AC Selector Switch, 120V 32A OFF +2
Answer:
No, the AC Selector Switch is a compact solution when circuit protection is provided elsewhere.
Does the blue sea 8077 device offer both switching and circuit protection?
Asked 8 ´months ago | Blue Sea 8077 AC Panel Main 120VAC 30A
Answer:
Yes, the blue sea 8077 integrates both switching and circuit protection within a single device.
Which fuses are compatible with the safety hub SafetyHub100?
Asked 8 ´months ago | Blue Sea 7725 Fuse Block Safety Hub 100
Answer:
The safety hub, SafetyHub100, is compatible with three 30A-200A MIDI fuses and four 1A-20A ATO/ATC fuses.
How much does this 48/10000 Victron Quattro inverter charger weigh?
Asked 8 ´months ago | Victron QUA483100100 Quattro 48/10000/140-100/100 120V VE.Bus
Answer:
The Victron Quattro 48/10000/140-100/100 120V VE.Bus weighs 128 Lbs.
Can I design these custom circuit breaker panels online?
Asked 8 ´months ago | Blue Sea Systems Custom Made Circuit Breaker Panel
Answer:
Sure, you can design these panels using the Panelwizard program offered by Blue Sea Systems online.
Is the Lynx Smart BMS compatible with my type of batteries?
Asked 8 ´months ago | Victron Energy LYN034170210 Lynx Smart BMS 1000 (M10)
Answer:
The Lynx Smart BMS is only intended to be used with Victron Smart Lithium Batteries.
Which batteries can the Lynx Smart BMS work with?
Asked 8 ´months ago | Victron Energy LYN034170210 Lynx Smart BMS 1000 (M10)
Answer:
The Lynx Smart BMS is specifically designed to work exclusively with Victron Smart Lithium Batteries.
What's the rating of the 12v usb outlet in the SeaLink charger?
Asked 8 ´months ago | Marinco SeaLink Deluxe Dual USB Charger and 12V Receptacle
Answer:
The 12 volt receptacle that comes with the SeaLink USB charger has a rating of 20 amps.
How many battery banks can the Argo Battery Combiner support?
Asked 8 ´months ago | Victron Energy BCD000802000 Argo BCD802 Diode Battery Combiner
Answer:
The Victron Energy BCD000802000 Argo BCD802 Diode Battery Combiner has the capacity to support two battery banks.
Is this priced with the wiring harness?
Asked 8 ´months ago | Balmar MC-618-H Voltage Regulator with harness 12 Volts
Answer:
The "H" in the part number MC-618-H denotes that the wire harness is included,
How long is the temperature sensor ASS000001000 included with a multiplus
Asked 8 ´months ago | Victron Energy ASS000001000 temp sensor for Quattro, MultiPlus and Cerbo GX
Answer:
The cable is about 4 ft long
Do you have a serpentine kit for a Universal M35B. It's on a Catalina 34 MKII.
Asked 8 ´months ago | Balmar 48-USP-M25 Pulley Kit for Universal M25, M-A
Answer:
The kit for the Universal 35B is the Balmar 48-USP-M35B Pulley Kit for Universal M35B, M25XPB, M40B
What cable do I need to to connect the Mk3 USB interface to a MultiPlus?
Asked 8 ´months ago | Victron Energy ASS030140000 MK3-USB Interface (VE.Bus to standard USB)
Answer:
This requires a VE Bus cable.
Is the connection on this a 3/8 th
Asked 7 ´months ago | Balmar MC-TS-A Alternator Temperature Sensor
Answer:
The battery temp sensor has a 3/8" connector but the alternator sensor is smaller, Its terminal is 1/4"
What is the purpose of the AC Selector Switch?
Asked 8 ´months ago | Blue Sea 9009 AC Selector Switch, 120V 32A OFF +2
Answer:
The AC Selector Switch is used for connecting one of two 120V AC sources to a single load.
Does the AC Selector Switch come with circuit protection?
Asked 8 ´months ago | Blue Sea 9009 AC Selector Switch, 120V 32A OFF +2
Answer:
No, the AC Selector Switch is a compact solution when circuit protection is provided elsewhere.
What are the dimensions of the Argo Battery Combiner?
Asked 8 ´months ago | Victron Energy BCD000802000 Argo BCD802 Diode Battery Combiner
Answer:
The battery combiner, Victron Energy BCD000802000 Argo BCD802 Diode, measures 2.4" x 4.7" x 3" in dimensions.
Can the Victron Smart Battery Sense function with any type of batteries?
Asked 7 ´months ago | Victron Energy SBS050150200 Long Range Bluetooth Smart Battery Sense
Answer:
Yes it should work with any 12, 24 or 48 volt battery bank.
What type of fuses does the SafetyHub100 use ? View answer
Asked 2 ´months ago | Blue Sea 7725 Fuse Block Safety Hub 100
