Accessories Q&A

Question 1

Does the Balmar APM-12 need replacement after absorbing a voltage spike? View answer

Asked 1 ´year ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 2

Is an APM-12 necessary if the alternator regulated by the Balmar MC-618? View answer

Asked 1 ´year ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 3

I know this device is designed to protect the alternator will this also protect other electronic devices on the vehicle from the effects of "load dump"? i.e. electronic ignition systems View answer

Asked 1 ´year ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 4

Is the Balmar MC-TS-B Battery Temperature Sensor compatible with an MC-612 regulator? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-B Battery Temperature Sensor

Question 5

Is it possible to shorten the Balmar MC-TS-B Sensor cable? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-B Battery Temperature Sensor

Question 6

Can I use the Balmar Duo Charge to charge a Lithium Battery? View answer

Asked 1 ´year ago | Accessories > Balmar DDC-12/24 Digital Duo Charge

Question 7

What is the length of the wire provided with the alternator temperature sensor? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Question 8

Is the alternator temperature sensor recommended for any specific system? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Question 9

How does the Centerfielder II manage two alternators? View answer

Asked 1 ´year ago | Accessories > Balmar CFII-12/24 Centerfielder II Charge Parallel Controller (while stocks last)

Question 10

Is this alternator sensor compatible with the Balmar MC 614? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Question 11

What happens if an alternator output is disconnected while the engine is running? View answer

Asked 1 ´year ago | Accessories > Balmar APM-24 Alternator Protection Module for 24V systems

Question 12

Does the MC-612 Dual regulator require an alternator sensor for both alternators? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Question 13

Where is the APM-12 body mounted? How should it be attached? View answer

Asked 1 ´year ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 14

What are the APM-12 product dimensions? View answer

Asked 1 ´year ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 15

In what ways does the APM-48 safeguard the alternator? View answer

Asked 4 ´months ago | Accessories > Balmar APM-48 Alternator Protection Module for 48V systems

Question 16

I have a Yanmar 4JH4-TE. Which adjustment arm do I need? with dog leg or without? View answer

Asked 1 ´year ago | Accessories > Balmar UBB Universal Adjustment Arm with Belt Buddy Tensioner

Question 17

Will the belt buddy tensioner fit the Yanmar 6LY2A-STP? View answer

Asked 1 ´year ago | Accessories > Balmar UBB Universal Adjustment Arm with Belt Buddy Tensioner

Question 18

I have a tachometer that is adjustable, but extremely difficult to do so. Will this work with an adjustable tach? View answer

Asked 1 ´year ago | Accessories > Balmar 15-TSS Tach Signal Stabilizer

Question 19

What is the Balmar APM-12 and what is its primary purpose? View answer

Asked 1 ´month ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 20

How do you install the Balmar APM-12? View answer

Asked 1 ´month ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 21

Balmar's site states the spacer is 1" diameter (I assume OD). Can you verify the inside diameter? View answers

Asked 1 ´month ago | Accessories > Balmar 10-4048 Spacer 1/4

Question 22

Does the Balmar MC-TS-B Battery Temperature Sensor have a 3/8" diameter connector? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-B Battery Temperature Sensor

Question 23

Is the Balmar CFII-12/24 Centerfielder II Charge Parallel Controller being discontinued? View answer

Asked 1 ´month ago | Accessories > Balmar CFII-12/24 Centerfielder II Charge Parallel Controller (while stocks last)

Question 24

Is an adjustment arm included with this Balmar BBU tensioning device? View answer

Asked 3 ´months ago | Accessories > Balmar BBU Universal Belt Buddy Tensioner (without adjustment arm)

Question 25

What function does the Balmar Kit-0070 Bushing Set serve? View answer

Asked 3 ´months ago | Accessories > Balmar Kit-0070 Bushing Set for 60 Series alternators

Question 26

What is the cable length of the Balmar MC-TS-A80 alternator temp sensor? View answer

Asked 2 ´months ago | Accessories > Balmar MC-TS-A80 Alternator Temperature Sensor with extended cable

Question 27

What is the dogleg size in the Balmar UBB2 adjustment arm? View answer

Asked 4 ´months ago | Accessories > Balmar UBB2 Dogleg adjustment arm with Belt Buddy Tensioner

Question 28

TIENE EL REGULADOR INCORPORADO O HAY QUE COLOCARLE UNO EXTERNO View answer

Asked 4 ´months ago | Accessories > Balmar 70-XT-170 Rebuild Kit for 170 amp XT Series Alternators

Question 29

Could you provide the dimensions of the Balmar 10-4000 1/2" spacer? View answer

Asked 4 ´months ago | Accessories > Balmar 10-4000 Spacer 1/2

Question 30

What is the cable length of the Balmar MC-TS-B30 battery temp sensor? View answer

Asked 2 ´months ago | Accessories > Balmar MC-TS-B30 Battery Temperature Sensor with extra length cable

Question 31

What function does the Balmar 10-4048 Spacer 1/4" serve? View answer

Asked 4 ´months ago | Accessories > Balmar 10-4048 Spacer 1/4

Question 32

Does the Digital Duo Charge benefit my start batt over a Battery to Battery charger? View answer

Asked 9 ´months ago | Accessories > Balmar DDC-12/24 Digital Duo Charge

Question 33

Is there a complete repair kit available for this product? View answer

Asked 2 ´months ago | Accessories > Balmar PAS-0111 internal regulator for Balmar 6 series 12 volt alternators

Question 34

Can the universal belt tensioner slot fit a 1/2" bolt? View answer

Asked 1 ´year ago | Accessories > Balmar UBB Universal Adjustment Arm with Belt Buddy Tensioner

Question 35

What are the key features of the APM-12? View answer

Asked 1 ´month ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 36

What are the limitations or warnings for using the APM-12? View answer

Asked 1 ´month ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 37

Which batteries are compatible with the Balmar DDC-12/24 charger? View answer

Asked 1 ´year ago | Accessories > Balmar DDC-12/24 Digital Duo Charge

Question 38

Question about Yanmar 3JH5E pulley, idler wheel, and yanmar belt tensioner View answer

Asked 1 ´year ago | Accessories > Balmar 48-YP-IDL Idler pulley for Yanmar JH engines

Question 39

How does the Balmar APM-12 protect alternators? View answer

Asked 1 ´year ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 40

What is the Balmar 7060 Rebuild Kit, and which alternators is it for? View answer

Asked 1 ´month ago | Accessories > Balmar 7060 Rebuild Kit for 6 Series 12 Volt Alternators

Question 41

Is the installation of the 7060 Rebuild Kit a DIY job, or does it require a professional? View answer

Asked 1 ´month ago | Accessories > Balmar 7060 Rebuild Kit for 6 Series 12 Volt Alternators

Question 42

How to connect Balmar ULR with Penta warning charging lamp View answer

Asked 1 ´year ago | Accessories > Balmar ULR Universal Lamp Relay

Question 43

What kind of terminals does the Balmar APM-12 use? View answer

Asked 1 ´year ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 44

What system voltage is the Balmar APM-12 designed for? View answer

Asked 1 ´year ago | Accessories > Balmar APM-12 Alternator Protection Module for 12 volt systems

Question 45

Are there instructions available for Balmar 7095 alternator rebuild kit? View answer

Asked 1 ´year ago | Accessories > Balmar 7095 Rebuild Kit for 95 Series Alternators IS NO LONGER AVAILABLE, SORRY

Question 46

Does the Balmar 1010 wire harness work with older Balmar regulators? View answer

Asked 1 ´year ago | Accessories > Balmar 1010 Wire harness for ARS5 or MC618 regulator to 6 series or XT alternators

Question 47

What is the function of the tensioner? View answer

Asked 1 ´year ago | Accessories > Balmar UBB Universal Adjustment Arm with Belt Buddy Tensioner

Question 48

Does the Balmar Belt Buddy serve as a tensioning device on this alternator adjustment arm? View answer

Asked 1 ´year ago | Accessories > Balmar UBB Universal Adjustment Arm with Belt Buddy Tensioner

Question 49

Does a different version of the Balmar Belt Buddy exist? View answer

Asked 1 ´year ago | Accessories > Balmar UBB Universal Adjustment Arm with Belt Buddy Tensioner

Question 50

With what devices can the alternator temperature sensor be used? View answer

Asked 1 ´year ago | Accessories > Balmar MC-TS-A Alternator Temperature Sensor

Accessories Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools